Medical Fiber Bandage Orthopedic Casting Tape

orthopedic casting tape1). ISO, CE, FDA approved2). Easy operation3). Molding fast, WaterproofFactory price, free sampleOrthopedic Casting TapeOrthopedic casting tape is composed by manifold layers of special made fiberglass, which was soaked by polyurethane. Polyurethane material is one kind of block copolymer which contains so

Featured Products

orthopedic casting tape

1). ISO, CE, FDA approved
2). Easy operation
3). Molding fast, Waterproof

Factory price, free sample
Orthopedic Casting Tape
Orthopedic casting tape is composed by manifold layers of special made fiberglass, which was soaked by polyurethane. Polyurethane material is one kind of block copolymer which contains soft segment and it is characterize by better viscosity, fast drying time, high rigidness and light weight. Dure to better biocompatibility, polyurethane is widely used in medical fields. Animal study and acute and chronic toxicity test have proved that medical polyurethane is non-toxic and no teratogenecity, no local irritation and no anaphylactic reaction.

Character & advantage
1) Simple operation: Room temperature operation, short time, good molding feature
2) High hardness & light weight
20 times hard than plaster bandage; Light material and use less than plaster bandage;
Its weight is plasters 1/5 and its width is plasters 1/3, which could reduce wound burden
3) lacunary (many holes structure) for excellent ventilation
Unique knitted net structure make sure good air ventilation and prevent skin damp and hot & pruritus.
4) Rapid ossification (concretion)
It ossifies in 3-5 minutes after open the package and could bear weight after 20 minutes, but plaster bandage need 24 hours for full concretion
5) Excellent X-ray penetration
Good x-ray penetration ability makes X-ray photo clearly without remove the bandage, but plaster bandage need remove to make x-ray inspection.
6) Good waterproofing quality
The moisture -absorbed percent is 85% less than plaster bandage, Even the patient touch the water situation, it still could keep dry in the injury position
7) Convenient operation & mold easily.
8) Comfortable & safe to patient/doctor
Material is friendly to operator and it wont become tension after concretion.
9) Wide application
10) Environment friendly
Material are environmental friendly, which could not produce polluted gas after inflammation.

How to use Casting Tape
1) Put the pad (cotton coil or cotton slipcover) on the surgery position.
2) Wear surgical gloves.
3) Select proper specification according to the surgery position.
4) Immerse the roll in room temperature water(21-24° C) for 4-6 seconds and squeeze it 2-3 times firmly. If the water warmer than 21-24° C shortens the immersing time, while cooler than 21-24° C water lengthens the time.
5) Enwind spirally; Overlapping the previous layer by one-half or two-thirds of the roll width. To maintain proper tension is very important and take care to avoid excessive tightness. The strength can be determined by the number of layers used. Just 3-4 layers provide a string non-weigh-bearing cast and 5-6 layers are typically adequate for weight-bearing cast.
6) Additional after the initial enwinding should be overlapped on itself to achieve good molding. Enwind the roll in 3-5 minutes after immersing in water because after that time it will be concretion.
7) Smooth and rub the surface to achieve good contact between layers. Keeping smoothness helps mold the wrap.
Allow about 10 minutes for sufficient concretion and let patients not move during this time. It could bear electric weight after 20 minutes.
8) It could be windowed, trimmed or removed with traditional cast saw equipment.
 
1ProductOrthopedic casting tape
2MaterialFiberglass or polyester
3Quality standardOur products have benn exported to many countiresd, meet international exporting standard
4ColorRed, green, yellow, blue, purple etc as our coustomer's requiremens
5SizeWidth: 2-5 inches(5cm-15cm) length: 4yds (36cm)
6Delivery TimeAbout 2 weeks
7MOQ1000 rolls
8StorageAt room temperature from 15 degree to 30 degree
9Shelf-life3 years
10Payment TermsT/T, Paypal
11Features and benifitsHigh rigidness, light weight Porous and good permeability Fast hardening, it only take 3-5 minutes to start hardening and can bear weight after 20 minutes Excellent X-ray radiolucency Good waterproofness Convenient and flexible to operate, good plasticity It can be widely used
12How to useWear surgical gloves and choose the right size as required Use cotton tallow packing or cotton -padded packing on the fixing place as the backing. Open  it, and take out the bandage, put it into water for 2-3 seconds and squeeze for 2-3 times, make sure the extral water is squzeed out. Wind it into spiral with moderate tightness as required, 2-6 layers on supporting place and 2-4 layers on non-supporting place. Shape it as required and 3-5 min for hardening. It can reach the functional rigid after 20 mintutes. Demolish it by using electric plaster saw.

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours