PE Self Adhesive Underground Anticorrosion Pipe Wrap Tape, Wrapping Bitumen Waterproof Duct Tape, Polyethylene Butyl Tape
Self adhesive flashing tape/flashband for roofing is produced with SBS elastomer and bitumen as raw materials, using polyethylene film.Aluminium foil coated on the upward or no file(both side self-adhesive) while self-adhesive protection layer on the downward surface.It has a widely prospect new contruction waterproof materials. Good self-adhesion, no leaking,cold flexibility,especially in self-adhesion. That is unque product in waterproof and application.
Characteristics:
1). Self-adhesion without bonding agent, torching
2). Good rubber elasticity and elongation
3). Excellent adhensiion bond
4). Safe application, no pollution
5). Excellent waterproof and high strength
6). Corrosion resistance and ageing-resistance
7). Available for wet ground
PRODUCT DETAILS:
PRODUCT IMAGES:
FACTORY SHOW:
PACKING AND LOADING:
OTHER PRODUCTIONS THAT OUR COMPANY HAVE:
IF YOU HAVE ANY INTEREST, PLS CONTACT WITH ME:
Self adhesive flashing tape/flashband for roofing is produced with SBS elastomer and bitumen as raw materials, using polyethylene film.Aluminium foil coated on the upward or no file(both side self-adhesive) while self-adhesive protection layer on the downward surface.It has a widely prospect new contruction waterproof materials. Good self-adhesion, no leaking,cold flexibility,especially in self-adhesion. That is unque product in waterproof and application.
Characteristics:
1). Self-adhesion without bonding agent, torching
2). Good rubber elasticity and elongation
3). Excellent adhensiion bond
4). Safe application, no pollution
5). Excellent waterproof and high strength
6). Corrosion resistance and ageing-resistance
7). Available for wet ground
PRODUCT DETAILS:
| Thickness (mm) | 0.8, 1.0, 1.2, 1.5, 2.0, 3.0, 4.0 or Customized |
| Width (cm) | 5, 7.5, 10, 15, 20, 25 ... 100 or Customized |
| Length (m) | 10, 15, 20 or Customized |
| Surface Materials | Aluminum, Non-woven Fabric, HDPE etc. |
| Base Materials | Asphalt |
| Base Mat | Non-felt |
| Properties | Test Result | Test Method |
| Maximum Load(Tensile strength) | Longitudinal:5.1kN/m Transverse:4.5kN/m | ASTMD2523-13 |
| Elongation ar Break | Longitudinal:104% Transverse:90% | ASTM D2523-13 |
| Adhesion to Plywood | At 4°C: 19.3kgf/30.5cm At 23°C: 22.4kgf/30.5cm | ASTM D903-98(2019) |
| Tear Resistance | Longitudinal:209N Transverse:218N | ASTM D4073-06 |
| Thermal Stability | <2.5mm | ASTM D1204-14 |
| Flexibility Temperature | No cracks at -29°C | ASTM D1970 |
| Moisture Vapor Permeability | 1.6ng/Pa.s.m2 | ASTM E96/E96M-15 |
| Seal Ability Around Nail | Excellent | ASTM D1970 Section 7.9 |
| Waterproof Integrity of Lap | No water seepage was found | ASTM D1970 Section 7.10 |
PRODUCT IMAGES:
FACTORY SHOW:
PACKING AND LOADING:
OTHER PRODUCTIONS THAT OUR COMPANY HAVE:
IF YOU HAVE ANY INTEREST, PLS CONTACT WITH ME: